
The Icom IC-2100H 25N 2 meter FM mobile features a rugged design and an easy-to-read alphanumeric display. The displays may be set to green or amber. The receiver covers 136-174 MHz and the transmitter delivers 55, 10 or 5 watts of output. The improved receive IMD helps provide protection from excessively strong signals such as pager signals. And the squelch attenuator (approx 10 dB) allows you to reduce interference from strong nearby signals. A winning combination for receive performance. The oversized tuning dial is easy to grab while on the move and the large 4-level backlit display clearly provides key information at a glance. Memory channels can be assigned names for easy recognition and easy access. The 2100H supports three different scan modes: Full Scan, Memory Scan, Programmed Scan and five scan resume conditions.
2100H 25N Specifications
enera
Features
Encode/Decode
Tone Scan
113 Memories
Scanning
Time-Out Timer
Call Channel
55/10/5 Watts Output
Call Channel
Priority Watch
Remote Hand Mic
General
Frequency Coverage [USA version] | Rx: 136-174 MHz Tx: 144-148 MHz |
Mode | FM |
Number of Memory Channels | 113 (inc. 3 pairs of scan edges, 3 log, 3 repeater, and 1 call channel) |
Usable Temperature Range | +14 to +140, -10 to +60; |
Frequency Resolution | 5, 10, 12.5, 15, 20, 25, 30, and 50 kHz |
Power Supply Requirement | 13.8 V DC+/-15% (negative ground) |
Current Drain - Transmit | 12.0 Amps (55 Watts) |
Current Drain - Receive | 1.0 Amp (max. audio output) 0.8 Amps (standby) |
Antenna Connector | SO-239 (50 ohm) |
Dimensions (projections not included) | 5.5(W) x 1.6(H) x 7.1 (D) inches (140 x 40 x 180 mm) |
Weight | 2 lbs, 10 oz (1.2 kg) |
Transmitter
Output Power | 55 Watt, 10 Watt, 5 Watt selectable |
Modulation System | Variable reactance frequency |
Max. Frequency Deviation | +/-5.0 kHz |
Spurious Emissions | Less than -60 dB |
Receiver
Receive System | Double-conversion superheterodyne |
Intermediate Frequencies | 1st 15.65 MHz, 2nd 450 kHz |
Sensitivity | Less than 0.18 for 12 dB SINAD |
Squelch Sensitivity | 0.13 at threshold |
Selectivity (wide/narrow) | More than 12 kHz at -6 dB, Less than 28 kHz at -60 dB |
Spurious and Image Rejection | More than 60 dB |
Intermodulation rejection ratio | More than 70 dB |
Audio Output Power at 13 V DC | More than 2.4 W at 10% distortion with an 8 load. |
External Speaker Connector | 3-conductor 3.5 (d) mm (1/8 inch)/8 ohm |
Previous: Icom 2200
Next: Icom V8000