Search

The correct way to unlock the Ecome poc radio

Date:Dec 16, 2020

Ecome poc radio have been distributed in various industries, and compared with conventional walkie-talkies, Ecome poc radio have more powerful communication intercom scheduling capabilities, more functions and better confidentiality, which meet the requirements of users for wireless communication. But there are still many users who don’t know the correct way to use the walkie-talkie. Today, let’s talk about how to use the Ecome poc radio correctly.

 

Ecome poc radio have been distributed in various industries, and compared with conventional walkie-talkies, Ecome poc radio have more powerful communication intercom scheduling capabilities, more functions and better confidentiality, which meet the requirements of users for wireless communication. But there are still many users who don’t know the correct way to use the walkie-talkie. Today, let’s talk about how to use the Ecome poc radio correctly.


ET-A33(750X750) (1)


1. Familiar with the characteristics of public network cluster communication, and master the operation method

 

Ecome poc radio are different from the full-duplex communication method of ordinary mobile phones, and also different from the simplex communication method of ordinary walkie-talkies, but are half-duplex communication loaded with complex control signaling, and should be used in the following ways:

 

Sending and receiving communication cannot be carried out at the same time. When in use, you must press and hold "PTT" to talk, release "PTT" to listen, and before a call is established, the public network trunking radio also uses a signaling transfer process to apply for communication to the system Therefore, the user who initiated the call needs to wait 1 second after pressing and holding "PTT" for the first call before speaking. After the call is over, the user who initiated the call should press the delete button to disconnect the call, so that the system can recover the communication channel in time and save system resources.

 

Read the operating instructions carefully, and be familiar with the keys and functions of the public network trunking radio. Check whether the antenna is damaged before turning on and whether it is installed tightly. Do not turn on and off repeatedly during use, and adjust the volume knob to the desired position.

 

If you find that the call effect is not good, you should change the direction or position to minimize the building block between the walkie-talkie and the base station of the trunking system. When using indoors, it is best to be close to the window.

 


ET-A43(2)

2. Strictly implement the regulations and prevent illegal communications

 

Ecome poc radio distinguish communication channels in the form of work groups. Users should communicate in accordance with the specified authority. Daily calls must use the delineated daily work group. When working, other work communication groups should be used according to the established communication plan. For non-work needs, it is forbidden to use or monitor non-daily work channels privately, and it is not allowed to make calls on non-workgroups or initiate implicit group calls without authorization.

 

3. Understand the cluster function, and be proficient in the conversion between application and conventional communication

 

Ecome poc radio generally have the current work group call, group call, and group call communication functions, and some have also opened the dialing function, and users can communicate according to their needs. The current work group call is the most convenient. Users only need to directly press "PTT" to launch, and they can call the work channel where the channel selection knob is located. For communication methods such as dialing group calls, dialing individual calls and dialing calls, users need to play the keyboard Select the corresponding number, and then press the "PTT" key to transmit.

 

4. Correct bad habits and regulate battery charging

 

It should be taken seriously in daily communication. The correct method of holding the phone is:

 

After pressing the "PTT" call, the user should keep the handheld walkie-talkie in a vertical state, and keep the handheld walkie-talkie or mobile phone microphone at a distance of 2.5cm to 5cm from the mouth, and the antenna should not touch the face. At the same time, do not continue to use walkie-talkies whose components such as antenna, knob, keyboard and battery have failed.

 

5. The battery charging should be mastered and essentials

 

The first three charges of a new battery are generally 12 hours to 15 hours. After that, the charging time can be shortened according to the indicator of the charger; for non-lithium batteries, you should make sure that the discharge is completed after the battery is fully used or the charger discharge function is used. After that, recharge.