Kirisun Pt 8000

Kirisun Pt 8000

Main Funciones: ISO9001: 2008 Accredited Designer & Manufacturer ·PTT ID ·Remote Kill/Stun/Activate/Revive ·Remote Background Monitor ·Talk Around ·Public Address ·Lone Work ·Emergency Alarm CTCSS/DCS/DTMF Encoder/Decoder
Chat Now

Product Details



Frenquency Range         136~174MHz 400~450MHz  438~490MHz 470~512MHz

Channel Capacity          8    

Channel Spacing          12.5KHz/25KHz

Frenquency Stability       2.5ppm

Operating temperature     -25~ + 55

Operating voltage          13.6V DC ±20%

Dimension(HxWxD)         150mmx129mmx43mm

Weight(with antenna&battery)   1310g



RF Power                  5W/25W

Frenquency modulation      16KφF3E/11KφF3E 

Antenna Impedance         50Ω

Modulation Limiting         ±2.5KHz@12.5KHz, ±5KHz@25KHz

Modulation Distortion       < 5%

Radiated Spurious Emission   -36dBm < 1GHz /-30dBm > 1GHz

FM Noise                   -40dB @ 25KHz/-35dB @ 12.5KHz   

Adjacent Channel Power       -60dB @ 12.5KHz/-70dB @25KHz


Reference Sensitivity        0.28μV@12.5KHz 0.25μV@25KHz typical

Operating Bandwidth        W≥±7 N≥±3.5

First IF of Receiver           49.95

Second IF of Receiver         450

Adjacent channel Selectivity   60dB @ 12.5KHz 70dB @ 20/25KHz

Intermodulation Rejection    65 dB

Spurious Response Rejection  70 dB

Rated Audio Power          4W

Rated Audio Distortion       5%

FM Hum&Noise             40/35


Special Features:


38 groups of standard CTCSS and 83 groups DCS are available (PC programmable).

Built-in CTCSS/DCS Encoder/Decoder can prevent co-channel interference and

unwanted conversations on the same frequency and ensure smooth communication.

*DTMF Encoder/Decoder

Programmable DTMF settings could be used for dispatch operations and remote

control applications.

*Easy-to-switch RF power

Each channel or all channels could be set to high or low RF power for different

applications by programming software or manually.

*Remote Kill/Stun/Activate/Revive

If the radio is killed or stunned, all attempts on operation by user, except power on/off,

will be ignored. The radio will be activated or revived only when it received the correct


*Public Address (PA)

The PA feature feeds MIC audio through a powerful external public address amplifier,

and outputs through external speaker, offering robust clarity in harsh, noisy


*Talk Around

This feature allows user prompt reset the RX and TX frequency to be same and offers

the possibilities of communication among radios in system without repeater.

*Emergency Alarm

The radio can be programmed to alarm local or secretly, to alarm with sending

emergency code and alert or background sound for different emergency



A certain code could be programmed with press or/and release of PTT button to notify

the other people who is the caller.

*Silent Interrogate

The radio could respond to a preprogrammed code automatically and silently to make

sure the user is in effective communication area.

*Lone Work & Security Check

The radio enters emergency mode if the user does not respond to a warning call

(Lone Work) or a inquire code (Security Check), adding security and safety for

individuals who work remotely and lonely. To prevent any carelessly missing, the reset

of lone work status could be by simply press on programmed key.

*Remote Background Monitor

Background sound could be monitored by remote receiver with specific code.

*Channel Scan

The radio could continuously scan each channel in the scan list for active

conversation. Simply press a preset key to activate scan. Priority scan and talk

channel (revert channel) could be set too.

*Selective Call

Individual call or group call could be activated by press on preprogrammed Call keys.

With different preset code, user can make two different calls in each channel.

*Busy Channel Lockout (BCLO)

BCLO is used to prevent the interference with the on-going conversation. If BCLO is

on, the radio will be remaining in receiving status even with PTT pressed to avoid

interfering with others on conversation.

*Time-out Timer (TOT)

When TOT is on and the transmission exceeds the preset time limit, the radio will stop

after warning tone. TOT can prevent the radio from any potential damage caused by

overlong transmission.


To monitor whether the current channel has signal, pressing the preprogrammed key.

The Monitor function is used to receive weak signal.

*Programmable keys

Up to 5 programmable keys could be set as different functions by hold or press it.

*Password Protection

The radio offers reading and writing password to protect the privacy and prevent

unauthorized modification of radio data.

*Wired Clone

To quickly set the parameters on a radio, the radio data could be cloned from another

radio with cloning cable, saving the time of parameter setting.

*Auto Power-on

The radio installed on car could be powered on automatically with the car started.

*Programmable Squelch Level (SQL)

*Embedded Radio Information