Yaesu FT-8800 is a UHF/VHF dual-segment car radio with superior configuration (built-in 1054 channels and up to 50W output power), multiple communication functions (supports multiple signaling, ARTS function) ). It is a rare and powerful amateur car radio.
Please note: The FT-8800R has been discontinued and has been updated to the FT-8900R.
Yaesu FT-8800 is a UHF/VHF dual-segment car radio with superior configuration (built-in 1000 channels and up to 50W output power), multiple communication functions (supports multiple signaling, ARTS function) ). It is a rare and powerful amateur car radio.
Wider frequency coverage
The FT-8800 supports both UHF/VHF bands, and the extended receiver coverage exceeds the average amateur radio.
Independent dual channel operation
The FT-8800 is a combination of two radios. 144 MHz or 430 MHz is used as the "main" TX / RX band while monitoring other bands. Each team can have its own volume and squelch controls.
Large LCD display (LCD)
The FT-8800 features built-in Omni-Glow display illumination from Yaesu. Four levels of illumination that can be used in different operating environments.
3.5"One-touch "hyper memory" function
The FT-8800's "hyper Memory" function allows you to store a complete set of data for two frequency bands in which the configuration is operating. The memory not only stores the frequency and audio data, but also the conversion status of the automatic repeater, packet parameters, scan mode and VFO tracking configuration.
Versatile scanning function
The FT-8800 scans the entire memory operating band or band. The radio will stop the signal encountered during the scan and resume the scan after a delay or after the operator. It can be configured during the band scan to keep it within the current band or to another channel once it reaches the channel edge. Dual frequency also provides a "priority channel" operation. The programmable memory scan feature allows for setting subband limits so that it does not waste time scanning or adjusting the SSB/CW portion of the band.
50-TONE CTCSS/104-TONE DCS TONE
Yaesu's 50-tone sub-tone CTCSS and 104-tone DCS signaling system can encrypt repeaters and remote base stations with built-in CTCSS / DCS The decoder allows silent listening on busy channels. In addition it can also Scan the tone to the input signal through the tone search scan, fast Match tones on the new repeater system
ARTS (AUTO-RANGE TRANSPONDER SYSTEM)
The built-in ARTS feature of the FT-8800 provides a “hand-shake” function. Work in an emergency with a relay station equipped with ARTS. If there is an "out of range" condition, for example, when a low power handheld is discovered, the repeater will issue an alert.
There are four programmable buttons on the microphone. Command copying is available. Front panel buttons include band shifting, VFO / memory switching, home channel Access, 1 MHz frequency stepping, power output selection, Repeater reverse and CTCSS / DCS settings
High output power
FT-8800's output power up to 50 watts in the VHF band In the UHF band, it is 35 watts. The heat sink temperature is monitored by the thermal sensor and the rear is joined The panel's cooling fan can handle overheating.
Over 1054 Memory Channels
The FT-8800R includes 1054 memory channels (527 channels each of the “primary” and “secondary” bands), independent Full duplex operation for volume and squelch control, as well as built-in CTCSS and DCS encoding/decoding circuitry, Remote installation is available, and if the optional YSK-8900 separation unit is used, the radio can be installed in the mini In the car.
|Frequency(Rx)||108-520MHz,700.000 - 999.995 MHz|
Handheld microphone (MH-48)
Previous: Yaesu FTM 350R
Next: No Information