YAESU FTDX3000

Product Details

YAESU FTDX3000 Transceivers

FT DX 3000 inherits the design concept of FT DX 9000 and FT DX 5000 transceivers, a member of the highest performance YAESU FT DX series transceivers, these transceivers have been praised by the world for pursuing the highest ideals of amateur HF communication equipment .

FT DX 3000 exhibits amazing multi-signal characteristics. Using two signal dynamic range measurement methods with 10 kHz signal spacing, the performance of the FT DX 3000 is 108.5 dB, IP3 +37 dBm. The frequency separation between the desired signal and the interference signal is only 2 kHz, the dynamic range is 106 dB, and the IP3 +33 dBm.

• 160 to 6 meter wave-SSB/CW/FM/AM/Oigital

• FT DX 3000 has an effective size of 14.4 inches x 4.5 inches x 12.3 inches (W x H x D) and weighs only 22 pounds. It is a sturdy transceiver that can be provided on all amateur radio frequency bands from 160 to 200 Very high performance 6 meters

  
  

• Including RTTY/PSK31 encoding/decoding

• Suitable for various convenient connections of RTTY, SSTV, PSK31, JT and other digital modes

  
  

• Reliable performance of 100 watt output power

• The RF final amplifier produces a clean 100 watt (less in some modes) transmit signal. The combination of large radiator and die-cast aluminum chassis can achieve efficient heat dissipation. The cooling fan located next to the final amplifier and TX low-pass filter dissipates the heat from the inside of the transceiver cabinet. The large axial fan is mechanically isolated from the chassis to reduce vibration and noise. The speed of the fan is continuously controlled by the temperature of the PA amplifier. Start at 40 degrees Celsius.

  
  

• Includes high-speed automatic antenna tuner

• Including high-speed automatic antenna tuner. The antenna tuner uses an LC switch. It has a large-capacity 100-channel memory; automatically stores tuning data to reduce the tuning time when changing the frequency.

  
  

• The famous Yaesu master knob

• The heavy-duty balanced brass core knob is used to bring the famous Yaesu smooth flywheel operation to the FT DX 3000 main dial knob. Each user can set his/her favorite main dial rotation torque feel.

  
  

• 9MHz signal reliable wideband IF output

  
  

• USB port

• Includes USB input for firmware update. This input can also simplify CAT, USB audio input/output and USB TX control (PTT, KEY and FSK)

  
  

• Remote control function

• Can use USB or serial port for external control (CAT). This feature means that the FT DX 3000 can be controlled remotely from a distance!

  
  

• Large full-color LCD display (4.3 inches) provides excellent control and visibility

• FT DX 3000 provides a wide viewing angle, high-contrast LCD 4.3-inch TFT full-color display, which is convenient for viewing the working functions of the radio. With this convenient display, excellent operability can be achieved. From a different perspective, it has excellent visibility.

  
  

• Outstanding RF front-end

• Fifteen separate band pass filters (BPF) are used for front-end protection, which effectively reduces undesired and out-of-band signals.

  
  

• Down-conversion receiver and powerful narrow bandwidth smoothing filter

• The powerful narrow bandwidth crystal roof filter enhances the multi-signal characteristics of the receiver. Under adjacent multi-signal conditions, the 3 kHz rooftop filter greatly improves the reception of SSB signals.

  
  

• Effective QRM and QRN suppression

• FT DX 3000 IF DSP can achieve effective QRM suppression. The 32-bit high-speed floating point DSP TMS320C6727B (maximum 2800 MIPS / 2100 MFLOPS) produced by Texas Instruments (TI) is used in the IF part of the FT DX 3000.

  
  

• Very low noise floor-excellent signal to noise ratio

• In FT DX 3000, the combination of its high stability and high precision 40 MHz TCXO (±0.5ppm, -10°C~+60°C) and DDS forms the basic frequency of the radio, which is locked to the PLL- IC and VCO.